Here you will find all available parts and drawings of the 'Makita 6952'. From here you can order all desired parts directly.Many parts must be ordered from the manufacturer, depending on the brand, this takes 5 to 10 working days. All the information we have is on our website, we cannot advise you on what you need, for that you will need to return the machine for repair. Please note the following when ordering:
Technical drawing of model Makita 6952
Spare parts list of model Makita 6952
| Pos. | Description | Price excl. VAT | Price incl. VAT | |
| Prices shown include VAT | ||||
| Label | ||||
| 001 | 850841-2 | 1.20 | 1.45 | |
| Tap screw 4x18 | ||||
| 002 | 265A48-7 | 1.00 | 1.21 | |
| Motorhuis set | ||||
| 003 | 183394-9 | 30.80 | 37.27 | |
| Rubber Pin 4 | ||||
| 003A | 263002-9 | 1.00 | 1.21 | |
| L/r slide | ||||
| 004 | 417553-6 | 1.20 | 1.45 | |
| Switch | ||||
| 005 | 650505-6 | 34.10 | 41.26 | |
| Sponge ring | ||||
| 006 | 685722-9 | 2.40 | 2.90 | |
| Capacitor | ||||
| 007 | 645253-0 | 4.80 | 5.81 | |
| Washer 14 | ||||
| 008 | 267759-4 | 3.60 | 4.36 | |
| Compression Spring 25 | ||||
| 009 | 233310-2 | 2.40 | 2.90 | |
| Flat Washer 24 | ||||
| 010 | 267175-0 | 1.20 | 1.45 | |
| Steel ball 3.5 | ||||
| 011 | 216040-0 | 1.00 | 1.21 | |
| Striker | ||||
| 012 | 324145-3 | 23.10 | 27.95 | |
| Anvil | ||||
| 013 | 324177-0 | 29.70 | 35.94 | |
| Steel ball 3.5 | ||||
| 014 | 216040-0 | 1.00 | 1.21 | |
| Washer 14 | ||||
| 015 | 267226-9 | 2.40 | 2.90 | |
| Rubber ring 14 | ||||
| 016 | 261119-2 | 1.00 | 1.21 | |
| Hammer Case | ||||
| 017 | 152828-3 | 30.80 | 37.27 | |
| Seal ring 14 | ||||
| 017A | 213179-0 | 4.80 | 5.81 | |
| Bus 14 | ||||
| 017B | 257709-7 | 6.00 | 7.26 | |
| No information available, not orderable | ||||
| 018 | 266295-7 | |||
| Socket | ||||
| 019 | 324420-7 | 4.80 | 5.81 | |
| Compression Spring 13 | ||||
| 020 | 233005-7 | 1.00 | 1.21 | |
| Washer 12 | ||||
| 021 | 267085-1 | 1.00 | 1.21 | |
| Locking Ring 11 | ||||
| 022 | 231951-8 | 1.00 | 1.21 | |
| Steel ball 5.6 | ||||
| 023 | 216041-8 | 1.00 | 1.21 | |
| Gear 22 | ||||
| 024 | 227362-3 | 3.60 | 4.36 | |
| Drive Shaft | ||||
| 025 | 324090-2 | 78.10 | 94.50 | |
| Pen 5 | ||||
| 026 | 268070-7 | 1.20 | 1.45 | |
| Lock washer 43 | ||||
| 027 | 233910-8 | 1.00 | 1.21 | |
| Compensating washer | ||||
| 028 | 344991-8 | 2.40 | 2.90 | |
| Internal gear 51 | ||||
| 029 | 227001-5 | 3.60 | 4.36 | |
| Washer 12 | ||||
| 030 | 267212-0 | 1.00 | 1.21 | |
| Ball Bearing 6901llb | ||||
| 031 | 211140-1 | 7.20 | 8.71 | |
| Internal gearbox | ||||
| 032 | 317428-8 | 13.20 | 15.97 | |
| Ball bearing 608 2rs | ||||
| 033 | 210024-0 | 3.60 | 4.36 | |
| Impeller 46 | ||||
| 034 | 240046-6 | 3.60 | 4.36 | |
| Armature | ||||
| 035 | 517544-8 | 62.70 | 75.87 | |
| Motor Field Support | ||||
| 036 | 152990-4 | 14.30 | 17.30 | |
| Brush Holder | ||||
| 036A | 643981-1 | 6.00 | 7.26 | |
| Field | ||||
| 037 | 635034-0 | 55.00 | 66.55 | |
| Ball bearing 607llb | ||||
| 038 | 211021-9 | 4.80 | 5.81 | |
| Brush Set CB411 RT0702C | ||||
| 039 | 195010-1 | 4.80 | 5.81 | |
| Brush Cap | ||||
| 040 | 643928-5 | 1.20 | 1.45 | |
| Tap screw 4x18 | ||||
| 041 | 265A48-7 | 1.00 | 1.21 | |
| Clamp Bracket | ||||
| 042 | 687124-5 | 1.00 | 1.21 | |
| Cable gland 10 | ||||
| 043 | 682566-8 | 1.20 | 1.45 | |
| Power cord 2x1.50 4.0mtr | ||||
| 044 | 695123-3 | 22.00 | 26.62 | |
| Carry Hook | ||||
| 045 | 324284-9 | 4.80 | 5.81 | |
| Label Makita | ||||
| 046 | 819063-3 | 2.40 | 2.90 | |
| Motorhuis set | ||||
| 047 | 183394-9 | 30.80 | 37.27 | |
| Rubber Pin 4 | ||||
| 047A | 263002-9 | 1.00 | 1.21 | |
| Engine housing gasket | ||||
| 048 | 442137-1 | 2.40 | 2.90 | |